Click image to view full size image
Pelton Hydro Turbine With Forged CNC Wheel For 530m Head Hydropower Station
Pelton turbine basic parameter:
Pelton turbine type: CJA475-W-123/2x10
Gross water head: 550m
Design Head: 529.0m
Design flow: 1.4m3/s
Install altitude: 590m
Rated capacity: 6539KW(two unit operation); 6638KW( one unit operation)
Rated efficiency: 90.0%
Rated speed: 750 rpm
Runaway speed:1354rpm
Runner material: ASTM A473 S41500 forged ans CNC machined.
Descrition:
The Pelton turbine is widely used in hydropower station with the heads from 80-800m.
Pelton turbine is consisted of pelton runner, turbine case, nozzles assembly, inlet pipe, deflector etc. The runner is assembled in the shaft of the generator, torque transmission by ping.
lt utilizes the dynamic power of high pressure water flow to rotate the runner and force the rotor work, The centre line of the jet is in the same plane as the runner while rotating.
Pelton turbine has the advantages of compact construction, stable running and easy operation. Normally, Small pelton turbine always arranged with horizontal shaft and one or two nozzles, Medium size and larger Pelton turbines are most often arranged with vertical shaft, and equip four or six nozzles to obtain more power.
Applications:
1. Water head: from 80m ~ 800m
2. Power: 0.5MW ~ 20MW
3. Frequency: 50/ 60HZ
4. Generator Output voltage: 400V, 6.3KV, or 10.5KV AC three phase,
We can supply pelton turbine generator above 500KW, supply the runner with Forge and CNC machine, or runner with cast abrading machine for your require.
If you are interested in the Pelton turbine, you should send some key parameters (such as net head, flow discharge, install altitude , unit number, frequency, voltage) in inquiry.
Specifications:
