Click image to view full size image
Horizontal Shaft Water Turbine Francis Turbine Runner with Water Head From 10m to 300m
Specifications:
| Type | Horizontal/vertical Francis turbine |
| Water head | 10m -- 300m. |
| Installation capacity | 0.1MW -- 20MW |
| Runner material | Stainless steel (0Cr13Ni4Mo) |
| Generator type | synchro generator |
| Auxiliary Equipment | Governor, Inlet Valve, unit side panel, excitation system |
Descrition:
The Francis type turbine is mostly suitable for hydropower stations with medium or high head from 10m to 300m. They are in both vertical or horizontal shaft arrangement and could be vastly selected by the hydraulic power stations.
lts feature is that the water flow enters the runner inward in a radial direction , changes direction gradually and then passes out axially. Francis turbine is characterized by reliable operation, simple construction and high efficiency, etc. Hydoru manufacture Francis runner have a good efficiency and cavitation performance.
Normally, we adopt the horizontal Francis with capacity below 5MW, runner diameter below 90cm. And the vertical Francis with capacity below 20MW.
Applications:
Francis turbines are the most common water turbine in use today.
They operate in a water head range of 10 to 300 meters and are primarily used for electrical po
Horizontal Shaft Francis Turbine Runner with Water Head From 10m to 300m
