Click image to view full size image
Stainless Steel Pelton Turbine Runner with Cast or Forge CNC Machine for Hydropower
Descrition:
Our pelton runner used high strength stainless steel material, with Cast machining or Forge CNC machining, it is have a good profile and high efficiency.
The Pelton turbine is widely used in hydropower station with the heads from 80-1000m.
The Pelton wheel is like a circular disk mounted on the rotating shaft . This circular disk have some buckets, placed at equal spacing around its circumference. Nozzles are arranged around the wheel such that the water jet emerging from a nozzle is tangential to the circumference of the wheel.
Applications:
1. Water head: 80m -- 1000m
2. Power: 0.5MW -- 20MW
3. Machining type: Cast abrading or monoblock Forge CNC
4. Diameter: below 2.5m
If you are interest in the Francis turbine, you should send some key parameters (such as net head, flow discharge, unit number, frequency, voltage) in inquiry.
We can offer pelton turbine runner above 500KW, supply the runner with Forge and CNC machine, or runner with cast abrading machine for your require.
Specifications:
| Type | Cast machining/ Forge CNC machining | |
| Water head | 80m -- 1000m. | |
| Runner diameter | Below 2.5m | |
| Runner material | Stainless steel (0Cr13Ni4Mo) Cast machine/Forge + CNC machine | |
|
|
 Sell
New Login
Company QR code Anytime Anywhere Mobile |